4.0 MB
|
ST7-1.40.50.1 Modelling a Composite Tank
The analysis of composite structures is more complex than metallic structures because it requires the definition of ply properties, laminate stacks and element directions. The tank geometry is shown below. The tank body is filament wound, with 5mm stainless steel reinforced penetrations. It is fitted into a stainless steel support collar. Six lifting lugs are provided.
This CAD geometry is imported into Strand7 using the IGES format.
The tank is composed of filament-wound VTM266-1 700gsm...
|
|
Menu
